Ceiling Mounted Wine Rack

Perhaps you want a nice ceiling mounted wine rack, but perhaps you've never considered the idea of making your own ceiling mounted wine rack. Keep in mind that the process is not that difficult. As long as you acquire the necessary knowledge beforehand, it shouldn't be a problem at all.

It is relatively simple to construct your own ceiling mounted wine rack; one design in particular is one which holds the bottles in a cantilevered position and which uses a minimal amount of materials. The only materials that you need for this design are wood, screws, paint, and primer.

This project should take you around four hours to complete. The first thing that you need to do is get all of the required materials and tools together. It is a much better idea to have everything prepared before starting the project, so that you can progress without having to hunt for material or tools.

The next thing that you have to do is cut the wood in order to create the two parts of the ceiling mounted wine rack, the base and the loops, and then you need to lay out the location of the loops. Remember that each loop is going to be fastened to the base with a pair of wood screws from behind, and that you should mark specific hole locations for the loops so that the screw will not end up hitting the large hole that you created in each loop, and also make sure to drill through clearance holes for the wood screws.

After all of this is done, next is the step to do the coating. You should lightly sand all of the surfaces to ensure that there are no sharp edges or rough areas, and after putting on a coat of primer and letting it dry, you then want to finish up by using some durable paint and make sure to let this dry as well. As well, you may want to then recoat with the paint or with a layer of polyurethane in order to increase the durability of the coating.


Wine Racks Home

Worth Checking Out